Please select your home edition
Edition
Maritimo 2023 S600 LEADERBOARD

America's Cup: The importance of choosing the right materials and process - prepreg or infusion?

by Emirates Team NZ Media 19 Mar 2022 03:05 PDT 19 March 2022
Emirates Team New Zealand Wind Powered Land Speed project - March 2022 © Emirates Team New Zealand

Like building anything, a house, a fence, a car or a boat, considerable thought is given to the materials used for the purpose of the build. It is one of the first considerations when matching objectives with budgets and time.

The Emirates Team New Zealand Wind Powered Land Speed project is exactly the same, as Mechanical engineer Tim Meldrum explains, "In the design process when we're trying to determine just how we're going to build all of these parts, the build team plays a major role, sitting around a table, thrashing out just what the process will be."

The build team are the Emirates Team New Zealand boat building team based in the ETNZ production facility on Auckland North Shore, a mix of young apprentices through to some of the most experienced boat builders in the New Zealand marine industry.

They know all there is to know about the materials used in their trade, and when it comes to composites, the main two options of construction are a pre-impregnated carbon fibre and dry fibre with a wet laminate.

"As the name suggests pre-preg is carbon fibre pre-impregnated with resin," explained boat builder Kurt Riechelmann. "We would usually use pre-preg because you get perfect resin ratios out of it and it is not until it gets hot that the resin will flow and it's almost like laying down dura-seal, or something like that."

However 'pre-preg' does not come cheap so you need to consider the costs and weight ramifications- like when weight savings are imperative in a foiling AC75 that needs to be as light as possible to take flight.

Emirates Team New Zealand build their AC75 hulls from pre-preg since a small saving over a larger area like a boat hull can add up a lot of weight. Also it allows the team to hit strict weight limits in the AC75 class rule, a lighter hull structure gives you more freedom to develop systems within the hull weight limit.

In the case of the land speed yacht, the pre-preg composites are reserved exclusively for what's in the air above the craft- but why? "We can be a bit more focused where we push the tech, so the mast, the wing, the spar, if we make that heavy it steals the righting moment and the stability that you need to generate power. So we are more weight conscious." explained Meldrum

But in the case of the mainfuselage body? "We will adding some ballast for downforce grip in the main body so it is much less sensitive to weight than the wing. Therefore with the land speed record craft the body is less mass critical, the weight is down low and does not affect righting moment too much. So pre-preg does not justify itself in this case so the smarter move is to save the time and money so we use dry fibre infusion and wet laminate."

Some of the main body elements lend themselves nicely to the infusion process where multiple layers of carbon are placed carefully in a mould dry, then a vacuum created within a bag and resin is released to flow into the carbon and cure as a rigid part. This process is great for thicker laminates without core and because the laminating process is done dry, it is not time pressured with resin curing.

Dry carbon fibre infusion is still a high tech material and process if you compare to the likes of a production trailer boat.

For the production team it is a more user friendly and speedier option than pre-preg in the construction. Estimates being that it would take a quarter of the time to lay up the body of the land speed craft as it would with pre-preg. But because it is slightly heavier way of laminating carbon, it is much harder to achieve the optimum resin to fibre ratio, so you end up carrying a little extra resin that you don't need in theory.

So the devil is in the detail and there are margins for error, but having the experience and knowledge of how to carefully set up the infusion process can be the difference between success or disaster in the production.

"It's a bit of a dark art, infusion." said veteran ETNZ boat builder Peter 'Pee Wee' Ockleston.

"It can go wrong and it can seriously go wrong, but the processes that we've been working on over the last 15 years or so, we've got it pretty close to getting right every time."

It is this talent and knowledge that the whole team relies on in the ETNZ production facility that is a hidden secret to success for many Emirates Team New Zealand production projects. "It's nice to have a real depth of experience within our build team so we can draw upon all forms of manufacture. We really can pick the process that best suits the part no matter what it is." concluded Tim Meldrum.

Related Articles

2024 Flotilla to Alaska Day 7
Blunden Harbour to Allison Harbour We left Blunden Harbour this morning around 7:30am after deciding that conditions looked good enough to scoot up to Allison Harbour, 18nm further toward Cape Caution. Posted on 18 May
Benetti starts outfitting work on new 67m B.Now
Work is now under way at Benetti's Livorno shipyard Benetti has begun work on the outfitting of a new 67-metre B.Now at its Livorno shipyard. The exterior styling of this steel yacht with six decks - one for use exclusively by the owners - is the work of RWD. Posted on 18 May
The Death and Rebirth of the Marine Generator
Are the AC generators of yesteryear the same ones we need in the future? The groundwork for the death of the marine generator was essentially done by Nigel Caldwell at Integral systems about 10 years ago. Prior to this, the alternator on a motor was really an after thought. Posted on 18 May
2024 Flotilla to Alaska Day 6
Mound Island to Blunden Harbour We left our anchorage at Mound Island just after first light this morning, around 5:30am. Conditions were calm, and according to weather information from reporting stations in and around Queen Charlotte Strait Posted on 18 May
Meet ISA's new Viper line
Innate contemporary charm ISA Yachts presents the new Viper line that takes in the shipyard's over twenty years of experience in the production of GRP sports boats, which made the brand famous all worldwide for, and perfects it through new stylistic elements. Posted on 17 May
WiderCat 92 ready for premiere at Venice Boat Show
This Italian premiere represents a special preview ahead of its worldwide debut The WiderCat 92, the innovative catamaran crafted by Wider, is set to make its Italian debut at the Venice Boat Show, taking place from May 29th to June 2nd, 2024. Posted on 17 May
2024 Flotilla to Alaska Day 5
Shoal Bay to Mound Island Environment Canada's forecast for Johnstone Strait today was a gale warning, with expected winds 20-30kts this afternoon. Posted on 16 May
Bennington appoints new VP of Engineering
Ian Smith is an experienced engineering leader with a strong history working in marine industries Bennington, North America's leading manufacturer of pontoon boats, announced today it has appointed Ian Smith as the new Vice President of Engineering. Posted on 16 May
2024 Flotilla to Alaska Day 4
Kanish Bay to Shoal Bay The weather is very much not cooperating with our original plan for this week, so we're making changes on the fly. Posted on 15 May
Vita Power makes first Bay Area delivery
Of 100% electric RIB to Westpoint Harbor, Redwood City Vita Power, the electric marine technology specialist announces the first San Francisco Bay Area delivery of its line of 100% electric commercial RIBS to Westpoint Harbor in Redwood City. Posted on 15 May
Maritimo 2023 S600 FOOTER