Please select your home edition
Edition
Sea Sure 2020 - SHOCK-WBV - LEADERBOARD

Adding pop-up cleat convenience onboard is easy

by Martin Flory Group 9 Aug 2019 06:59 PDT

Many owners prefer the clean appearance and added safety of retractable boat cleats, yet may not realize just how easy an upgrade installation is. Accon Marine 202 Pop-Up® Cleats require only basic tools for mounting, enabling replacement of old bollard-style models in minutes.

Made of corrosion-resistant, marine-grade 316 stainless steel for exceptional durability, stylish Accon 202 Pop-Up Cleats push flush into the deck when not required, eliminating a common tripping hazard. Available in 114mm, 152mm, 203mm and 254mm sizes to suit a wide range of boats, they offer the same secure holding power as a standard cleat. The popular Accon 152mm model is shown to hold 5,170kg in laboratory testing. All Accon Marine products are supported by a lifetime warranty.

Each 202 Series Pop-Up Cleat comes complete with a stainless steel backing plate that doubles as an installation template. The mounting project requires only basic tools: a drill with standard bits and a small hole saw attachment, jigsaw, screwdriver and wrench. The user supplies four stainless steel screws with washers and nylon insert locking nuts, the dimensions of which depend on the size cleat being installed. Accon offers a convenient chart for proper hardware sizing.

To begin, ensure there is appropriate clearance below deck of the mounting location to accommodate the cleat and Pop-Up mechanism when retracted. Apply painter's tape to the hull to protect the area from scratches.

Use the supplied backing plate to mark the cleat's outline on the tape surface, then drill three holes with the hole saw attachment to mark the center and ends of the cleat. A jigsaw makes it easy to finish cutting out the required opening.

With the mounting hole cut, simply place the cleat into position to check the fit, mark the four holes required for the retaining screws and remove the cleat again. After drilling out the screw holes, remove the backing tape, carefully lower the cleat into place and insert mounting screws. Position the backing plate below deck, then tighten the screws with the washers and locking nuts. A video demonstrates the process step by step, plus covers instructions for top mounting when there is no below-deck access.

For more information contact Accon Marine, Tel: +1-727-572-9202; Fax: +1-727-572-7621 or visit www.acconmarine.com.

Related Articles

New Pull-Up Cleats have modern appearance
Accon's 490 Series Rectangular Pull-Up Cleats are forged from 316 marine-grade stainless steel Contemporary boat designs have become sleeker and more angular. Matching this modern aesthetic are the new 490 Series Rectangular Pull-Up Cleats from Accon Marine. Posted on 21 Sep
Accon Fender Hangers - faster and safer than knots
Quick Release Fender Hangers are built to last With Quick Release Fender Hangers from Accon Marine, even inexperienced guests can quickly complete the task and get the fenders' height and fore/aft placement spot-on every time. Posted on 22 Jul
Slim-Line Cleats perfect for cluttered gunwales
Pull-up 304 Series Slim-Line™ Cleats from Accon Marine are the solution Many gunwales are too narrow to install a traditional cleat, especially if sail track or other hardware is present. For these applications, pull-up 304 Series Slim-Line™ Cleats from Accon Marine are the perfect solution. Posted on 25 Feb
Finally, a Bow Light that's comfortable to sit on
Accon 210 Pop-Up LED Bow Light is US Coast Guard-approved for two nautical miles Protruding hardware on a boat can detract from its sleek foredeck, & is uncomfortable to sit or step on. The 210 Pop-Up® LED Bow Light from Accon Marine folds down flush into its base during the day and flips up with the touch of a button when night falls Posted on 3 Nov 2020
Snagged lines/falls avoided with Pop-Up Cleats
202 Series Pop-Up Cleat is available for virtually any size boat Snagging a line on a cleat while docking could have serious consequences, as can stubbing a toe and falling overboard. Both are easily avoided with Accon Marine's 202 Series of innovative Flush Mounted Pop-Up® Cleats. Posted on 19 Sep 2020
Pull-up Cleats enhance appearance of larger boats
Providing a cleaner overall appearance while eliminating a potential trip hazard Pull-up cleats add value to any boat by retracting flush into the deck when not required, providing a cleaner overall appearance while eliminating a potential trip hazard. Posted on 14 Aug 2020
Quick Release Hanger make fender deployment a snap
Low-profile base and removable companion hinge ring that mounts permanently to the fender line Putting out fenders as a boat returns to the dock is always a bit of a chore, particularly for novices who may be uncomfortable tying knots or may lack experience gauging the correct height for placement. Posted on 26 Mar 2020
Pop-up LED Bow Lights update the look of any boat
One quick and easy way to replace an old, dated bow light One quick and easy way to update the look of a boat is to replace an old, dated bow light. When upgrading to a compact LED Pop-Up Bow Light from Accon Marine, owners get the added safety of retractable hardware. Posted on 28 Sep 2019
Accon enables easy addition of drink holders
Single and double drink holders utilize a thin, quick-release base One problem with traditional drink holders, whether permanently or temporarily mounted, is their bulky design limits where they can be used. Innovative single and double drink holders from Accon Marine instead utilize a thin, quick-release base Posted on 22 May 2019
Folding Cleat installs in minutes
Retractable cleats preserve a boat's lines and improve safety Retractable cleats preserve a boat's lines and improve safety, but can't always be installed where needed due to the presence of structural elements under the deck. Posted on 4 Apr 2019
Maritimo 2021Oct - S60 BOTTOMMarina Exchange FOOTER 1Composites Constructions 2021 - CAPE50 - FOOTER